Home
>
products
>
Used Concrete Line Pump
>
|
| Place of Origin | China |
| Brand Name | SANY |
| Certification | CE, ISO9001 |
| Model Number | SY5128THB-10020C-8D |
Used/second hand sany truck-mounted concrete line pump 10020
SY5128THB-10020C-8D truck mounted line pump environmental protection improvement chassis engine applies advanced diesel engine exhaust post-treatment core technology SCR system, which can effectively remove harmful components in exhaust gas, and the emission standard is comprehensively upgraded to the national IV standard, meeting the environmental protection licensing requirements of various parts of the country. The MAN technology chassis on-board pump has achieved a dual upgrade of pumping and driving emission standards, and its excellent environmental performance allows you to run worry free. Increased displacement and pumping efficiency up to 110m ³/ h. 10% higher than similar products.
Efficient pumping system: large diameter conveying cylinder, new type of molded large angle hopper, and forced mixing feeding, greatly reducing concrete conveying resistance, and improving suction efficiency to over 90%.
The world's number one vehicle pump outlet pressure: an ultra-high pressure vehicle pump, with a maximum outlet pressure of up to 28MPa, once again breaking the world record for the output pressure of the vehicle pump, with a pumping height of up to 400 meters.
The conventional car mounted pump is 2MPa higher than similar products: by increasing the main system pressure and reducing pressure loss, the outlet pressure of the conventional car mounted pump is increased to 20MPa, which is 2MPa higher than its peers, and the pumping height reaches 250 meters.
Product Info.:
| Model | SY5128THB-10020C-8D |
| Length | 9185mm |
| Width | 2470mm |
| Height | 3030mm |
| Wheelbase | 4700mm |
| Weight | 12495kg |
| Theoretical concrete delivery pressure (low) | 10MPa |
| Theoretical concrete delivery pressure (high) | 20MPa |
| Theoretical concrete delivery capacity (low pressure) | 108m3/h |
| Theoretical concrete delivery capacity (high pressure) | 58m3/h |
| Theoretical pumping frequency (low pressure) | 27 times/minute |
| Theoretical pumping frequency (high pressure) | 15 times/minute |
| Delivery cylinder - inner diameter | 230mm |
| Delivery cylinder - stroke | 1600mm |
| Hopper volume | 0.6m3 |
| Hydraulic oil tank volume | 500L |
| Rated engine power | 186kW |
| Chassis brand | Dongfeng Tianjin |
| Chassis model | DFL1120B13 |
| Engine model | ISDe180 40 |
| Engine power | 132kW |
| Emission standard | Euro IV/V |
| Fuel tank volume | 280L |
| Discharge | 4.5L |
| Maximum speed | 90km/h |
Product Show
Contact Us at Any Time
